Product Categories
Contact Us

Qingdao Shengmei Machinery Co.,Ltd

Address: No.6 Wangjialou Industrial Area, Huangdao District, Qingdao City, China

Contact: Sandry Pang

TEL: +86-532-85131608

Moblie: +86-18660248878

Fax: +86-532-86158266


Home > Product > cartridge dedusting machine

cartridge dedusting machine

  • Resin Sand Temperature Adjustment Machine&sand Cooling Machine

    Contact NowResin Sand Temperature Adjustment Machine&sand Cooling MachineIt's a widely used sand temperature regulating equipment. The heat is interchanged between the water in pipe and falling sand, achieving the adjusting goal. You can set a temperature test to set a temperature. Its productivity is different from 5t/h to 40t/h.Read More

  • Counter Weight Vacuum Casting Machine

    Contact NowCounter Weight Vacuum Casting Machineapplication field of V-process (1)medium-big castings with some quatity previously casted by chemical binder sand especially ester-hardening water glass sand and resin sand,co2 water glass sand adventage:production,cost,environment, labour strength,quality(2)castings with some quatity but still little or dimentional big for high pressure molding line but hand-molding can not offer a good quality; adventage:labour strength,quality production,environment,(3)castings with little even single quatity but have high requests on surface coarse or dementional accuracy or machining; adventage:surface quality,dimentional accuracy,machining,environment ADVANTAGES OF V-PROCESS CASTING MANUFACTURING: Mold filling rate during pouring process is higher by 25-30% than during greensand mold filling. The mold provides for a minimum pouring temperature for metal due to the high filling rate and heat capacity. The lowest production cost of casting, by 25-30% lower, than the castings made with sand molds and by times lower in cost than traditional cold-hardening mixtures casting – the best solution for mass-production of castings. No necessity to prepare the sand mixture – the process is carried out with dry sand. No waste products, sand mix regeneration system and eco-friendliness. Possibility to produce thin-walled steel castings. Long service life and high durability of patterns, no contact between the pattern and the sand (only through film, which excludes the possibility of quick wear). Minimum raw material consumption. Considerable decrease in the prerequisites for ‘hot cracking’. High-temperature castings knock-out capability. Less cost for thermal treatment of ready castings. No need for additional/further training of operators.Read More

  • Lost Foam Electric Steam Pre-foaming Machine

    Contact NowLost Foam Electric Steam Pre-foaming MachineThe pre-foaming machine is one of the most important equipment of the lost foam casting white area. At present, there are two types of the machines: electric pre-foaming machine and steam pre-foaming machine. They are intermittent. The control system adopts the most advanced PLC technology. The...Read More

  • Lost Foam Casting Machine Vibrating Table

    Contact NowLost Foam Casting Machine Vibrating TableLost foam equipment for white side 1.lost foam sand conditioning 2.three-dimensional vibrating table 3.turn over machine 4.steam foaming machine 5.molding machineRead More

  • Best Quality Raining Sand Feeding Machine&shower Type Sand Feeder

    Contact NowBest Quality Raining Sand Feeding Machine&shower Type Sand FeederRaining sand feeder is a special sand adding equipment in V process. The working principle of this equipment is that the vibrating table will raise when sand box move to the position under the raining sand feeder. Then the up surface of the sand box will be tightly sealed with under surface of...Read More

  • Foundry Sand Conveying Equipment&belt Sand Conveyor Machine

    Contact NowFoundry Sand Conveying Equipment&belt Sand Conveyor MachineThe casting sand conveying equipment is the necessary equipment in lost foam sand processing process. It is mainly used for conveying casting sand by air conveying system and belt conveyor. Its belt width and length is according to the sand processing capacity and sand bin capacity and other...Read More

  • Lost Foam Screw Molding Equipment&hydraulic Molding Machine

    Contact NowLost Foam Screw Molding Equipment&hydraulic Molding MachineThe molding machine mainly makes EPS beads after pre-foaming and aging put to fill the pattern, and finally made into the required foam plastic patTern through steam heating, compression, molding, decompression, water cooling and sizing, demoulding and drying. At present, there are two kinds:...Read More

  • Metal Foundry Roll-over Mould Lifting Machine&rollover Stripping Machine

    Contact NowMetal Foundry Roll-over Mould Lifting Machine&rollover Stripping MachineThe roll-over draw machine is the key equipment in resin bonded molding system and is used in the turnover and drawing of mold or core. The machine uses O type hydraulic four-pillar structure, dual hydro cylinder for pattern drawing, having the advantage of good rigidity and high drawing...Read More

  • Resin Sand Vortex Type Reclaimer Machine

    Contact NowResin Sand Vortex Type Reclaimer MachineThe mechanical vortex type reclaimer is the most popular one in China now since it fits Chinese sand material. The power is strong, single regeneration 5t/h can reach at 11kw, single regeneration 10t/h can reach at 22kw. The damage to sand is little. It is easy to maintain, based on the big door...Read More

  • High Precision Sandbox Turning Equipment&rollover Machine

    Contact NowHigh Precision Sandbox Turning Equipment&rollover MachineThis is an important device in vacuum process casting production line and its function is to turn over flasks for V process. It is used in ordinary vacuum process molding equipment. It has two different types in vacuum process casting production line. It has the fixed type one and movable one....Read More

Qingdao Shengmei Machinery Co.,Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Qingdao Shengmei Machinery Co.,Ltd All Rights Reserved.