Product Categories
Contact Us

Qingdao Shengmei Machinery Co.,Ltd

Address: No.6 Wangjialou Industrial Area, Huangdao District, Qingdao City, China

Contact: Sandry Pang

TEL: +86-532-85131608

Moblie: +86-18660248878

Fax: +86-532-86158266


Home > Product > hot sale recycling machine suppliers

hot sale recycling machine suppliers

  • Best Quality Raining Sand Feeding Machine&shower Type Sand Feeder

    Contact NowBest Quality Raining Sand Feeding Machine&shower Type Sand FeederRaining sand feeder is a special sand adding equipment in V process. The working principle of this equipment is that the vibrating table will raise when sand box move to the position under the raining sand feeder. Then the up surface of the sand box will be tightly sealed with under surface of...Read More

  • Metal Foundry Roll-over Mould Lifting Machine&rollover Stripping Machine

    Contact NowMetal Foundry Roll-over Mould Lifting Machine&rollover Stripping MachineThe roll-over draw machine is the key equipment in resin bonded molding system and is used in the turnover and drawing of mold or core. The machine uses O type hydraulic four-pillar structure, dual hydro cylinder for pattern drawing, having the advantage of good rigidity and high drawing...Read More

  • Vibration Shakeout Machine&vibrating Breaker

    Contact NowVibration Shakeout Machine&vibrating BreakerThe material falls from the bottom, side. There are many vibrating deliver types, including L12 series, L267 series, L27 series, L25 series. Different size and stable can be made as requirement.Read More

  • Sand Magnetic Separating Machine&magnetic Separator

    Contact NowSand Magnetic Separating Machine&magnetic SeparatorWe have permanent magnetic roller, hanging magnetic extractor, magnetic extractor, widely used in various molding process, the magnetic capacity can reach at 3000Gas. The productivity is different from 5t/h to 30t/h. Features: Strong magnetic, good separation effect, small size, light weight,...Read More

  • Counter Weight Vacuum Casting Machine

    Contact NowCounter Weight Vacuum Casting Machineapplication field of V-process (1)medium-big castings with some quatity previously casted by chemical binder sand especially ester-hardening water glass sand and resin sand,co2 water glass sand adventage:production,cost,environment, labour strength,quality(2)castings with some quatity but still little or dimentional big for high pressure molding line but hand-molding can not offer a good quality; adventage:labour strength,quality production,environment,(3)castings with little even single quatity but have high requests on surface coarse or dementional accuracy or machining; adventage:surface quality,dimentional accuracy,machining,environment ADVANTAGES OF V-PROCESS CASTING MANUFACTURING: Mold filling rate during pouring process is higher by 25-30% than during greensand mold filling. The mold provides for a minimum pouring temperature for metal due to the high filling rate and heat capacity. The lowest production cost of casting, by 25-30% lower, than the castings made with sand molds and by times lower in cost than traditional cold-hardening mixtures casting – the best solution for mass-production of castings. No necessity to prepare the sand mixture – the process is carried out with dry sand. No waste products, sand mix regeneration system and eco-friendliness. Possibility to produce thin-walled steel castings. Long service life and high durability of patterns, no contact between the pattern and the sand (only through film, which excludes the possibility of quick wear). Minimum raw material consumption. Considerable decrease in the prerequisites for ‘hot cracking’. High-temperature castings knock-out capability. Less cost for thermal treatment of ready castings. No need for additional/further training of operators.Read More

  • Foundry Sand Conveying Equipment&belt Sand Conveyor Machine

    Contact NowFoundry Sand Conveying Equipment&belt Sand Conveyor MachineThe casting sand conveying equipment is the necessary equipment in lost foam sand processing process. It is mainly used for conveying casting sand by air conveying system and belt conveyor. Its belt width and length is according to the sand processing capacity and sand bin capacity and other...Read More

  • Lost Foam Casting Machine Vibrating Table

    Contact NowLost Foam Casting Machine Vibrating TableLost foam equipment for white side 1.lost foam sand conditioning 2.three-dimensional vibrating table 3.turn over machine 4.steam foaming machine 5.molding machineRead More

  • High Precision Sandbox Turning Equipment&rollover Machine

    Contact NowHigh Precision Sandbox Turning Equipment&rollover MachineThis is an important device in vacuum process casting production line and its function is to turn over flasks for V process. It is used in ordinary vacuum process molding equipment. It has two different types in vacuum process casting production line. It has the fixed type one and movable one....Read More

Qingdao Shengmei Machinery Co.,Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Qingdao Shengmei Machinery Co.,Ltd All Rights Reserved.