Product Categories
Contact Us

Qingdao Shengmei Machinery Co.,Ltd

Address: No.6 Wangjialou Industrial Area, Huangdao District, Qingdao City, China

Contact: Sandry Pang

TEL: +86-532-85131608

Moblie: +86-18660248878

Fax: +86-532-86158266

Email: shengmei@shengmeicast.com

Home > Product > low price screw molding equipment

low price screw molding equipment

  • Foundry Sand Conveying Equipment&belt Sand Conveyor Machine

    Contact NowFoundry Sand Conveying Equipment&belt Sand Conveyor MachineThe casting sand conveying equipment is the necessary equipment in lost foam sand processing process. It is mainly used for conveying casting sand by air conveying system and belt conveyor. Its belt width and length is according to the sand processing capacity and sand bin capacity and other...Read More

  • Lost Foam Molding Line Pre Expander

    Contact NowLost Foam Molding Line Pre ExpanderLost foam molding linge weighing pre-expander is suitable for the pre-foaming of EPS, EPP and its copolymeric plastics in EPC. After pre-foaming by the machine, the particles have stable weight and low moisture content. It is the first choice for full mould casting.Read More

  • High Precision Sandbox Turning Equipment&rollover Machine

    Contact NowHigh Precision Sandbox Turning Equipment&rollover MachineThis is an important device in vacuum process casting production line and its function is to turn over flasks for V process. It is used in ordinary vacuum process molding equipment. It has two different types in vacuum process casting production line. It has the fixed type one and movable one....Read More

  • V Process Molding Line Equipment

    Contact NowV Process Molding Line EquipmentV process is namely called “Vacuum process casting machine”. It is a new type casting technology which adopts dry sand (no water, no binder, no tagger).Read More

  • Lost Foam Screw Molding Equipment&hydraulic Molding Machine

    Contact NowLost Foam Screw Molding Equipment&hydraulic Molding MachineThe molding machine mainly makes EPS beads after pre-foaming and aging put to fill the pattern, and finally made into the required foam plastic patTern through steam heating, compression, molding, decompression, water cooling and sizing, demoulding and drying. At present, there are two kinds:...Read More

  • Vacuum Process Molding Machine

    Contact NowVacuum Process Molding MachineAutomatic V process molding line, V process manipulator,Semi-auto Vacuum process molding line, normal Vacuum process molding line.Read More

  • Magnesium Casting Equipment

    Contact NowMagnesium Casting EquipmentWhat is our MAIN EQUIPMENT? Vacuum stablized system: Vacuum pump, Vacuum meter, Surge tank, dust removal tank, steam separator Molding system: Die shoe, Heater, sand molding box , Vibrating table, Manipulator, Die lifter. Sand reclamation system: Sand screen, Elevator, Conveyor,sand flask...Read More

  • Foundry Equipment LFC Sandbox&flask for Metal Casting Production

    Contact NowFoundry Equipment LFC Sandbox&flask for Metal Casting ProductionThis is an important parts in lost foam. We use these flasks to make sand mold so that we can pouring and then get our castings. This type of sandbox is different from vacuum process casting production line sandbox.Read More

  • V Process Equipment

    Contact NowV Process EquipmentVacuum process molding line foundry equipment is called vacuum seal casting molding machine. It’s a kind of dry sand casting molding machine which adopts no adhesive.Read More

  • Vacuum Process Molding Line for Foundry

    Contact NowVacuum Process Molding Line for FoundryDVANTAGES OF V-PROCESS CASTING MANUFACTURING: Mold filling rate during pouring process is higher by 25-30% than during greensand mold filling. The mold provides for a minimum pouring temperature for metal due to the high filling rate and heat capacity. The lowest production cost of casting, by 25-30% lower, than the castings made with sand molds and by times lower in cost than traditional cold-hardening mixtures casting – the best solution for mass-production of castings. No necessity to prepare the sand mixture – the process is carried out with dry sand. No waste products, sand mix regeneration system and eco-friendliness. Possibility to produce thin-walled steel castings. Long service life and high durability of patterns, no contact between the pattern and the sand (only through film, which excludes the possibility of quick wear). Minimum raw material consumption. Considerable decrease in the prerequisites for ‘hot cracking’. High-temperature castings knock-out capability. Less cost for thermal treatment of ready castings. No need for additional/further training of operators.Read More

Feedback
Qingdao Shengmei Machinery Co.,Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at shengmei@shengmeicast.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Qingdao Shengmei Machinery Co.,Ltd All Rights Reserved.