Product Categories
Contact Us

Qingdao Shengmei Machinery Co.,Ltd

Address: No.6 Wangjialou Industrial Area, Huangdao District, Qingdao City, China

Contact: Sandry Pang

TEL: +86-532-85131608

Moblie: +86-18660248878

Fax: +86-532-86158266


Home > Product > sand cooler for V process price

sand cooler for V process price

  • Resin Sand Reclamation Line

    Contact NowResin Sand Reclamation LineResin sand reclamation and molding line Introduction of resin sand reclamation and molding line The resin sand is a molding and core making technology which the mould and core sand will be self-harded in some time in the flask when added in certain amount glue. At present, the foundry usually...Read More

  • Cylinder Sand Cooling Machine

    Contact NowCylinder Sand Cooling Machinecylinder sand cooling machine Product Description Foundry sand cooling machine i s used for the cooling of return sand to the correct temperature before entering the sand mixer. With a continuous feed-back of in-and outlet sand temperature and moisture to the sand cooler control system the...Read More

  • Fluidized Sand Cooling Equipment&sand Temperature Regulator

    Contact NowFluidized Sand Cooling Equipment&sand Temperature RegulatorThis sand cooling equipment is used to cool the sand so that used sand temperature will be getting down. It has water pipes on the upper part and at the bottom part, this sand temperature regulator has several fans. It is also easy to maintain this sand cooler if it has something wrong.Read More

  • FTB Series Sand Cooler for V Proces &fluidized Bed

    Contact NowFTB Series Sand Cooler for V Proces &fluidized BedSand cooling equipment is the best sand temperature conditioning device in the dry sand cooling field. It adopts high pressure positive blower as the power. The dry sand will be floating under the blowing, then exchange the heat with the cool water in the pipes. The specification is different...Read More

  • Best Quality Raining Sand Feeding Machine&shower Type Sand Feeder

    Contact NowBest Quality Raining Sand Feeding Machine&shower Type Sand FeederRaining sand feeder is a special sand adding equipment in V process. The working principle of this equipment is that the vibrating table will raise when sand box move to the position under the raining sand feeder. Then the up surface of the sand box will be tightly sealed with under surface of...Read More

  • Vacuum Process Molding Line For Foundry

    Contact NowVacuum Process Molding Line For FoundryDVANTAGES OF V-PROCESS CASTING MANUFACTURING: Mold filling rate during pouring process is higher by 25-30% than during greensand mold filling. The mold provides for a minimum pouring temperature for metal due to the high filling rate and heat capacity. The lowest production cost of casting, by 25-30% lower, than the castings made with sand molds and by times lower in cost than traditional cold-hardening mixtures casting – the best solution for mass-production of castings. No necessity to prepare the sand mixture – the process is carried out with dry sand. No waste products, sand mix regeneration system and eco-friendliness. Possibility to produce thin-walled steel castings. Long service life and high durability of patterns, no contact between the pattern and the sand (only through film, which excludes the possibility of quick wear). Minimum raw material consumption. Considerable decrease in the prerequisites for ‘hot cracking’. High-temperature castings knock-out capability. Less cost for thermal treatment of ready castings. No need for additional/further training of operators.Read More

  • Vacuum Process Sand Cooling Roller&cooling Cylinder

    Contact NowVacuum Process Sand Cooling Roller&cooling CylinderIn many cases, we can choose cooling cylinder to cool the high-heated sand. Cooling cylinder is double-deck, the temperature of the heated sand is lowed by cool water in the internal layer. It has the advantage of wide application and low energy consumption.Read More

  • V Process Molding Line

    Contact NowV Process Molding LineV process molding line fit for big size and simple shape castings, like counter weight, bathtub,concave, jaw plate, wheel,hummer.Read More

  • Counterweight V Process Molding Line Equipment

    Contact NowCounterweight V Process Molding Line EquipmentPrinciple of V process V process is namely called “Vacuum process casting machine”. It is a new type casting technology which adopts dry sand (no water, no binder, no tagger). It’s automatic by an electric control system.Read More

  • Full Mold Vacuum Process Casting Molding Line

    Contact NowFull Mold Vacuum Process Casting Molding LineThis machine is designed and made by our company.It's a Patented Product. It has good function like a complex molding line.It can make different castings which fit for the v process. Vacuum Process Foundry Molding Machine Line is called vacuum seal casting molding equipments Line.Read More

Qingdao Shengmei Machinery Co.,Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Qingdao Shengmei Machinery Co.,Ltd All Rights Reserved.