Product Categories
Contact Us

Qingdao Shengmei Machinery Co.,Ltd

Address: No.6 Wangjialou Industrial Area, Huangdao District, Qingdao City, China

Contact: Sandry Pang

TEL: +86-532-85131608

Moblie: +86-18660248878

Fax: +86-532-86158266

Email: shengmei@shengmeicast.com

No-bake Resin Sand Production Line

No-bake Resin Sand Production Line

The process flow of the resin sand production line: the sand box and castings after casting are suspended from the driving to the inertial vibration sanding machine. The casting is transported to the shovel workshop, and the sand box is transported to the sand box storehouse. A large chunk of skin, the riser is sorted by artificial, through the sand, sand mass and small chilled iron falling to the magnetic separator by the sand raster. After magnetic separation, it is transported to the multi function vibration crushing regenerator to break, remove film and sieved. After the sieved sand into the 1# bucket elevator, the lifting machine is raised to the two stage regenerator of the centrifugal rotor. Strong regeneration, full film removal. The regenerated sand mixed with micro powder, dust and resin film flows into the flow screen type wind separator through the flow sand trough. The air separator is connected with the cyclone dust collector and the pulse back blow deduster to remove the powder and dust. The reclaimed sand is then upgraded to the sand storage by 2# bucket elevator. The inlet of the moving double arm continuous resin sand mixer is connected by the pneumatic gate and the sand outlet under the sand bank. After pressing the mixed sand and electrical control box, the pneumatic brake board is automatically opened, and the fine sand is flowing into the sand mixer from the sand bank. In the sand mixer, the sand is transported to the starting end of the sand by the spiral sheet, and the curing agent is added to the control valve from the near end. The resin is added to the near end valve after the small leaf blade to be mixed to the back. The mixture of curing agent, resin and reclaimed sand is fully mixed and sent to the front outlet to automatically flow into the ready sand box for molding and core making. This equipment is controlled by imported PLC (programmable control), which has excellent automation performance and suitable for small and medium-sized foundry enterprises in resin sand process.

Product Details

Technological process

The process flow of the resin sand production line: the sand box and castings after casting are suspended from the driving to the inertial vibration sanding machine. The casting is transported to the shovel workshop, and the sand box is transported to the sand box storehouse. A large chunk of skin, the riser is sorted by artificial, through the sand, sand mass and small chilled iron falling to the magnetic separator by the sand raster. After magnetic separation, it is transported to the multi function vibration crushing regenerator to break, remove film and sieved. After the sieved sand into the 1# bucket elevator, the lifting machine is raised to the two stage regenerator of the centrifugal rotor. Strong regeneration, full film removal. The regenerated sand mixed with micro powder, dust and resin film flows into the flow screen type wind separator through the flow sand trough. The air separator is connected with the cyclone dust collector and the pulse back blow deduster to remove the powder and dust. The reclaimed sand is then upgraded to the sand storage by 2# bucket elevator. The inlet of the moving double arm continuous resin sand mixer is connected by the pneumatic gate and the sand outlet under the sand bank. After pressing the mixed sand and electrical control box, the pneumatic brake board is automatically opened, and the fine sand is flowing into the sand mixer from the sand bank. In the sand mixer, the sand is transported to the starting end of the sand by the spiral sheet, and the curing agent is added to the control valve from the near end. The resin is added to the near end valve after the small leaf blade to be mixed to the back. The mixture of curing agent, resin and reclaimed sand is fully mixed and sent to the front outlet to automatically flow into the ready sand box for molding and core making. This equipment is controlled by imported PLC (programmable control), which has excellent automation performance and suitable for small and medium-sized foundry enterprises in resin sand process.

Welcome to buy the no-bake resin sand production line with low price from us. We are one of the leading and successful suppliers in China. We also welcome the customized orders. You can reach us at 86-18660248878.
Hot Tags: no-bake resin sand production line, China, suppliers, customized, low price
Related Products
Email Us
Feedback
Qingdao Shengmei Machinery Co.,Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at shengmei@shengmeicast.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Qingdao Shengmei Machinery Co.,Ltd All Rights Reserved.