Contact Us

Qingdao Shengmei Machinery Co.,Ltd

Address: No.6 Wangjialou Industrial Area, Huangdao District, Qingdao City, China

Contact: Sandry Pang

TEL: +86-532-85131608

Moblie: +86-18660248878

Fax: +86-532-86158266


Home > Exhibition > Content

Error factors for temperature measurement of EPC equipment

Qingdao Shengmei Machinery Co.,Ltd | Updated: Apr 27, 2017

In the use of EPC equipment production is always used to measure the temperature, if the resulting error will also have a great impact, that produces temperature measurement error factors will be those?

I. Steam emission: For high-pressure melting, the overflow of gas in the molten pool or crucible increases or decreases the heat radiation resulting in error.

Hole Barrier: For most instruments any weakening of the signal will result in a drop in temperature indicator values; The dirt on the observation window affects the accuracy of most pyrometer.

Window glass Material: Not all glass has the same transmission performance; some "grey" color and some of the other glass transmittance with the wavelength changes that will make the conventional pyrometer malfunction.

IV. Instrumentation calibration: Through lens aiming requires two optical distances to overlap accurately, which affects the general Pyrometer of all grades.

Qingdao Shengmei Machinery Co.,Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Qingdao Shengmei Machinery Co.,Ltd All Rights Reserved.